4095 Multi-Conductivity Analyzer
0-9.999µS/cm, 0-99.99µS/cm
Streamline Water and Steam Monitoring with Waltron’s Multi-Conductivity Analyzers
The Waltron 4095 Multi-Conductivity Analyzer is designed for optimal performance in water and steam monitoring. Catering specifically to the needs of power plants, water treatment facilities, and industrial facilities, this advanced solution offers unparalleled accuracy in ranges as low as a range of 0-9.999µS/cm. Thanks to its slide-in 1/4-DIN IP66 panel-mount enclosure, the Waltron 4095 connects directly to specific and cation conductivity sensors to add pH monitoring to existing systems. Alternatively, your old messy cation column with Waltron’s new cartridge holder system and two new conductivity sensors for ultimate reliability and ease of maintenance. Experience streamlined operations with single-transmitter displays of specific and cation conductivity, calculated pH values, easy onboard data logging, and live trending.
KEY FEATURES
- Slide-in 1/4-DIN IP66 (front) panel-mount enclosure perfectly replaces an existing two-channel conductivity configuration or to couple with a new Waltron cation exchanger
- Bright 3.5″ TFT color display shows precise values from specific and cation conductivity sensors, and generates a calculated pH value for the same sample point
- Easy to install and configure with alarms, relays, and two 4-20mA outputs per channel
- On-board data logging and live trending
- Choice of 24VDC or 110-240VAC versions, cULus certified
PERFORMANCE
Range
0-9.999µS/cm, 0-99.99µS/cm
Accuracy
< 0.6% of the measuring range
Measuring Parameters
Specific Conductivity, Cation Conductivity, Calculated pH
Sensor Classification
Connects to specific and cation conductivity sensors
Data Storage
Extract via USB 2.0
Power Supply
AC 110 to 240 V +10 / -15%; 48 to 63 Hz or AC/DC 24 V +30/-25 %; 48 to 63 Hz
OPERATING CONDITIONS
Sample Temperature Range
32 – 122° F (0 – 50 °C)
Ambient Temperature Range
32 – 140° F (0 – 60 °C)
SIGNAL OUTPUTS
Analog Outputs
5 x 0/4 – 20 mA for measured signals
Alarms
General Alarm
Optional
RS422/RS485
MECHANICAL
Construction
Transmitter – high strength ABS, IP66 (front)
Dimensions
Face plate is 96 x 96 mm; fits a standard 1/4DIN (92 x 92 mm) cutout
Mounting
Panel mount
Finish
Corrosion resistant
Technical Documents
- Coming Soon!
PERFORMANCE
Range
0 to 9 999 uS/cm, 0 to 99.99 uS/cm
Accuracy
< 0.6% of the measuring range
Degassing Efficiency
93.5% in less than 90 seconds
User Interface
5.5” color touch screen
Alarms
General Alarm, Low Degassing Efficiency Alarm, Resin Exhausted Alarm
Analog Outputs
4 x 0/4 – 20 mA for measured signals
Data Storage
Extract via USB 2.0
Power
110 to 240 VAC. 48 to 63 Hz
Options
Optional RS422/RS485
Method
Meets ASTM D4519-16 for degassing method
OPERATING CONDITIONS
Sample Temperature
32 – 140° F (0 – 60 °C)
Ambient Temperature
32 – 131° F (0 – 55 °C)
Sample Flow Rate
031 – .044 GPM (7-10L/h)
Pressure
Maximum of 145 psig (10 bar)
Sample Medium
Liquid
MECHANICAL
Construction
Transmitter – high strength ABS. IP67
Wet Section – stainless steel or PVC
Dimensions
29 x 37 x 10″ (613 x 939 x 254mm)
Mounting
Wall mount or panel mount
Finish
Corrosion resistant
